HMT VersaDrive Spiral Flute ImpactaTap M10 x 1.50mm
code
309010-0100
£67.27
£56.06
Call For Details - 01772 230021
VersaDrive® Spiral Flute Taps are designed for tapping deep & blind holes and can be used with the VersaDrive® Clutched collet or adapted for use in a reversible Magnet Drill, impact wrench or even used with any standard Hand Tap wrench.VersaDrive® ImpactaTaps are the first and only range of taps that are suitable to be driven by impact wrenches and impact drivers, providing at least 15x faster performance than tapping by hand. With a specially designed twin-lead, cutting geometry - the dual hardening process with Titanium coating provides a fantastic solution for tapping holes in steel.
Features & Benefits
Ground Flutes create the perfect tapped holeSafer tapping with minimal kickback Specially hardened for impact wrench use High grade tool steel for high accuracy & long life Goldmax low friction titanium coating to stop burn out High strength, non slip shank design Wide range of sizes
Features & Benefits
Ground Flutes create the perfect tapped hole
Write Your Own Review
Tapping Hole Size requred: 8.5mm
Total Length 70mm
For fastest performance use on impact wrenches & impact drivers
Check the minimum torque requirement
Laser cut holes & Stainless Steel require higher torque
Use appropriate lubrication and correct RPM to achieve long tool life
Total Length 70mm
For fastest performance use on impact wrenches & impact drivers
Check the minimum torque requirement
Laser cut holes & Stainless Steel require higher torque
Use appropriate lubrication and correct RPM to achieve long tool life
Login and Registration Form